We're blowing out tons of Action Figures and Customs!!!
BRING A BUCKET!!!
Click the image below to go to the auction gallery!!!
Star Wars, Super Powers, DC Universe, Marvel Legends, Walking Dead, Dr Who, Play Arts...
We've
got a a little bit of everything. With 150+ items currently listed,
we're looking to take the tally to 400+ items this week or until our
fingers fall off!!!
Well, its summertime, things to do and places to see. I've been wanting to thin out my DC Universe collection for a while and this week I'm doing it!!! Up to 150 figures are on sale now running through June 3, 2013. Click the image below to go to the listings page!!!
Most figures start @ $12.99 with C&C figures starting at $29.99. Get in early and bid high!!!
And don't forget to peruse the flat rate grab bags!!! If it fits... it Splits!!!
I have been asked several times over the years to provide a tutorial on how I do my "Pull Through" fabric capes for DCU and Dark Knight figures… I don't think the description of the process has ever really made it absolutely clear so I think this in depth visual guide should do nicely. I may be blowing my cover a little bit in doing this but last night I sat down to make one and I had my phone handy so I figured "What the hell... Let's do this."
For an added feature with a wired fabric cape, click the video above!!
Fabric:
First I start with prepping my fabric. You can use about any kind of fabric to do these but I find the thinner weightier polyesters work best. The thicker the fabric the more likely it will have a bulky appearance. This is a nice stretchy material and when handled with care it can look quite nice.
For symmetry I take the selected cloth and fold it in half for sizing and cutting.
For dramatic presence I make the cape 1.5 body lengths wide and just over an inch taller than the figure. It will draw up a little after final placement so you'll want that extra length. I use a Fiskars rotary cutter to make swooping circular cuts for the scallops then I terminate the top in an arch just so there are no straight lines. within 30 seconds you have your cape produced.
Figure Prep: To make way for the fabric cape to attach I take a dremmel with the small threaded cylinder to grind out my entry points into the points where the original cape ends. Right there at the clavicle/collar bone. I aim my bit at the center of the shoulder blades right in the mid back. This dodges any articulation points on the inside. You can broaden this hole in the back for more working space if you like. Once you've completed this step you should be able to see clean through from the collar bone to the back.
I also notch out the back of the neck for better posability of the head
(i.e. Batpod Posing/Gliding/General Action Posing) This time I also did
the front of the neck after I had taken these pictures. this is done
using the same dremmel bit.
Cape Prep:
You will be pulling a lot of fabric through some tiny holes so it is important to reinforce the fabric with some sort of "gasket" if you will to prevent the fabric from ripping. I use a hi bond double sided tape. You could probably find something like it at a fabric store as a hemming tape. You don't need much as you see which is nice.
I make 2 squares and place them symmetrically at a width of the shoulders. That gives you slack to go around the neck (removing the head really makes this easier). I fold the fabric over onto the tape and voila!! your cape has every hem it will ever need. This is a reinforcement as you will use a thin wire to guide the fabric
into the body. I use a dental pick to punch a hole through the fabric
and tape and loop my wire through the tiny hole.
I take 2 lengths of wire (one for each entry point) and needle it through the hole and then bend it perfectly in half. I then twist the wire as tightly as possible to make for a clean feed through the hole.Once both wires have been fed through I then twist THOSE together making ONE braid of wires.
I then clip the collected wires and take my needle nose pliers and begin to crimp them into as small a bunch as possible. Being careful not to push any fabric back through the figure's front I bundle the wore and fabric into the exit point in the back. I use a hot glue gun to finalize the bundle by filling only the exposed area with hot glue. this will keep everything in place.
You do have the option in this step to use the still hot glue to
"pin" the cape to the figure's back. This can help keep the cape from
lurching up on the figure and looking weightless. It can also help you define the direction and tightness of the cape over the shoulders. A little Matte Finish in a can and this Dark Knight is a lot less conspicuous and a lot more awesome!!! (Matte Finish used in Picture #1)
So there we have it. A nice FULL low profile cape for our Movie Masters Dark Knight Batman. This trick can be used on any character needing a replacement for those awkward vinyl capes. I think it adds a lot of posability and balance to these figures that just deserve SO much better when it comes to their presentation. Be sure and check back in the future as I plan to take these capes a few steps further in the future... I'm thinking "Memory Cloth"...
There's only two of them, and they're both just villains, but Mattel's long-awaited action figures based on the campy 1960s Batman TV series have finally appeared, and they're fantastic.
These are nigh-perfect likenesses of Burgess Meredith as the Penguin
and Frank Gorshin as the Riddler; presumably equally fantastic figures
of Adam West as Batman, Burt Ward as Robin and Julie Newmar as Catwoman
can't be too far behind.
But the real test of quality will be
when Mattel makes Cesar Romero as the Joker. Will they remember to
sculpt his mustache, which he famously refused to shave even while
covering his face with white make-up? If these two figures are any
indication, the Joker's upper lip should be in good hands. But of course I won't ignore the execution of the lego quality cape on our full quality sculpted hero… When we say EXECUTION… we don't mean stand it up and shoot it dead… Come on, Mattel… if you need tips on economical cape construction… please just ask.
Be sure to check out our various conventions Wishlists throughout the blog!!!
Wouldn't You Love to See Some Christopher Reeve Movie Masters Classics???
Hop on over to the Pol•y•mer•phe•li•a blog for a look at the newly completed
SUPER POWERS COLLECTION
GUM CARD ARCHIVE
The archive is made up of custom created trading card layouts showcasing all three series of the popular Super Powers Collection as photographed from my personal collection. After much tinkering and reworking the entire series is complete and ready for viewing!!!
These are set up to standard trading card size (plus bleed) @ 300dpi. Be on the look out for the full sheet series!!!
We're making the most of this free virtual elbow room and expanding into yet a second blog.
Pol•y•mer•phe•lia will become a virtual collection of those playthings from yesterday. Currently in the works are Hi-Res photo archivesof my own personal collection. The good, the bad and the ugly will all be in attendance. Be sure and drop by as we pull everything together to hopefully create the largest high quality photos of our favorite immortal heroes and villains!!
For our immediate collection we will be highlighting:
Other collections may make their way into the fold but for now I am focusing on these lines that were the hub of my childhood. Updates may be slow in the works but we'll be sure and bring all that news here to GeekSummit for your effortless consumption.
by
