GeekSummit's Star Wars BLOWOUT!!!

Just in time to fill in your new Black Series Collection, GeekSummit is clearing out Star Wars VOTC and Movie Heroes Click the image below to go to the listings page!!!

Most Star Wars figures start @ $7.99 with Custom figures starting at $9.99. Get in early and bid high!!

Be sure and check out the large selection of DC Collectibles as well. Most figures starting at $14.99

AND don't forget the S.L.U.G. Zombies (Series 1 & 2) starting at $2.99

Current auctions run through Sept, 8 2013.

 

Star Wars Black Series

Custom 6" Stormtrooper

I simply couldn't wait for Series 3 to come around in retail near Christmas, but picking this guy up last Thursday was a huge treat right off my wishlist!! I immediately took him out of the box and examined him in his stock glory with his multiple blasters and backpack and filthy weathered paint and within minutes I was on the road to pruning this guy down to basics...

 The Standard Bright White Stormtrooper

Ever since I was a kid the Stormtrooper was the one action figure that always stood out... Maybe simply out of contrast to all the other brightly colored toys of the day? Maybe because anytime there is more than one there is an army? Maybe because they are the coolest looking Star Wars character of all characters? All of these are right... My heart has never led me wrong.

To rekindle that old flame for my favorite plastic counterpart in his new format, I picked up a Sandtrooper at Target for $19.99 and brought him home immediately to wash away the filth of his off base outpost.

Don't get me wrong... Sandtroopers are troopers too but you really just can't beat a bright white stormtrooper. Unless you're Luke Skywalker & Han Solo in Stormtrooper disguise... then technically you can mop up a whole space station full of 'em... I make that one concession.

GeekSummit's DC UNIVERSE BLOWOUT!!!!

Well, its summertime, things to do and places to see. I've been wanting to thin out my DC Universe collection for a while and this week I'm doing it!!! Up to 150 figures are on sale now running through June 3, 2013. Click the image below to go to the listings page!!!

Most figures start @ $12.99 with C&C figures starting at $29.99. Get in early and bid high!!!

And don't forget to peruse the flat rate grab bags!!! If it fits... it Splits!!!

Star Wars Black Series | SDCC Exclusive Boba Fett and Han Solo in Carbonite

Boba Fett is coming to San Diego Comic-Con in July, and he's bringing a friend.

One of the collectible toys that Hasbro will have available exclusively at the pop-culture event this year is a detailed 6-inch Boba Fett action figure from the new Star Wars Black Series. What's even better is that he comes packaged with two weapons, his iconic jet pack and the ultimate accessory: Han Solo frozen in carbonite.

Kids of all ages can relive the moments in the Cloud City of Bespin during The Empire Strikes Back where Boba Fett hauls off his prey, or the scenes in Return of the Jedi where the iconic bounty hunter has taken Solo to Jabba the Hutt's palace on Tattooine.

 

 The special-edition set is priced at $44.99 and will be sold at the Hasbro booth at the San Diego Convention Center July 18-21.

The first wave of four Black Series figures, due out in early to mid-August, includes Luke Skywalker in his X-Wing Fighter flight suit, fan-favorite droid R2-D2, Sith lord Darth Maul and an Imperial Sandtrooper.

If you don't want to wait that long to get Star Wars stuff, in honor of Star Wars Day/May the Fourth on Saturday fans can use the promo code "SWFANDAY" to get 20% off Star Wars and Angry Birds Star Wars toys online at HasbroToyShop.com."

SOURCE: ToyArk.com

But I think we ALL remember that it was ThreeA toys suggestive entry a few years back. I would think Google was aglow shortly after the first few shots arrived detailing fully articulated 6 inch incarnations of any true Star Wars fan's favorite 2 armored baddies complete with scaled vintage packaging. Definitely Hasbro had taken notice of that interest. Regardless of who produces my first 6 inch Stormtrooper... Thank You and May the Force Be With You...

 

Legacy Millenium Falcon | Expanded Edition

I happened across a half pallet of these the first time they sold and clearanced. It was quite a find since I wanted to wait until the prices dropped on these. Apparently price as well as size kept a lot of these out of collector hands in their first incarnation.

So on to the business. A long time ago I took this model and dusted it in black an accented some areas that needed some life. I never thought I'd get back around to my full intentions but yesterday I ran the entire trilogy through the old Xbox and got cracking.

First I completely disassembled the falcon into top bottom and interior... Bye Bye electronics... You will be missed. I took all the interior pieces and gave then a deep black wash. Then I got to trimming out pieces. This was such a huge playset but you really only had half of the interior to interact with. I wanted to remedy this to justify the size of this beast. So with only my exacto I started to score away at these obstructions. One being the door to the cockpit as well as the corridor entry. I adds padding with this thick rubbery adhesive rubber sheeting and sliced into panels on location. I blacked out the inner walls of the cockpit while I applied decals. (Stickers loose their glue when they sit in a box in the garage for 5 years) and I found the wet paint to be a good substitute for the missing adhesive.

 

Then I went beyond the sick bay doors and knocked that wall out as well. The compartment that housed the escape pod was a molded non functioning door so I scored it through as well to remove if but then I had another wall... So I continued to score away at it. With access to both sides relieved I now had this empty space with just the inner shell showing. I took a Jedi council floor panel and grafted it onto the existing platforms and painted it over for an approximate match. I still had some empty space and figured I would make this the engine room. With fodder parts and other Star Wars accessories I started to fill in with "machinery" to give this new space purpose. So now I have a completed interior with new detailing and added space! I also removed the single turret gun seat in the middle and replaced it with a ladder (not pictured).

The outside was worked over with several layers of massive wet wash and dry brush. Once all the pieces had been treated I reassembled it and continued to detail the landing gear and artillery in black & oily steel.

The circle is now complete!!!

Class II Slave I | Boba Fett Style

So I was strolling through Target this week and just happened to get there on stock day. I look down and there's Jango Fett's Slave I sitting right on the front of the shelf. Just $19.99 but wow the box was tiny!! I knew I had to be dealing with an abbreviated version but wow this box was tiny and light too. I expected at least for this to be the size of the Target Exclusive a few years back but still I didn't know HOW it would fit in this box. Anyway enough about the box… it's small.

Before Blackwash

After BlackWash

So since I'm not a prequel guy I decided to give this hunk'a'plastic a makeover, or a work over since we are aging it about 30 years. The bottom "bell" of the Slave I is one piece along with the shoulders that host the rutters so I took just the bell and sprayed it with a Rustoleum Brown Boots satin finish. It proved a little glossy so I went back over with a matte finish. For the shoulders, bumper and loading dock I mixed up a green and then dirtied it with black and mixed it again. So now I have made this Slave I "NEW" with this alternate paint scheme, it's time to knock a few years into it.

I mixed up a darker gray to match the bit on the tailfin and went to replace a few panels along the top of the body and front. I used my Target Exclusive as a general reference but the panels were split up a little different so there was some liberties taken. For the more weathered panels I took my flat brush in between coats on the solid panels and I just ran it from the seams inward with lifting strokes as drybrush. That left just that slight bit of color creating a weathered metal.

Finishing off I mixed a little light gray to match the original body color and went back to work on the bell again. I used my broad strokes to wear down the very edges of the bell and then drybrushed in my weathering using the same method as I did on the upper body. Start in the seams and brush inward with lifting strokes.

There we are. The Mandalorian Manhunter is ready for duty. That's it really. I just wanted to post this up.

UPDATE: After about a week of admiring this piece I did come back with a blackwash (mostly water) and it really brought some scale to the ship. Gave it a nicely weathered look that it was still surprisingly missing.

• Before Blackwash •

• With Blackwash •